Cold press (separated plate cylinder)

  • Home
  • / /
  • Cold press (separated plate cylinder)

FEATURES

  • There is no damage of omega 3 by 70 degrees low temperature oil extraction method.

Cold pressing method that is high-quality premium product manufacturing system for oilpressed by machine temperature 70~80 degrees, below oil temperature 50 degrees So that can keep the oil taste and flavor also there is no effect damage for nutritive and omega 3. We got a exclusive position for the manufacturing cold press machine in korea with several patented technology.

  • There is no Benzopyrene !

Use a low temperature during operating machine, there is no Benzopyrene.

  • Can be extract raw seeds for medicinal use.

Raw sesame, perilla seed, safflower seed, sunflower seed.

  • Can be extract with roasted seeds as well.

Better taste than hydraulic oilpress type.

  • It’s very sanitary usage for stainless oil guide plate with case.
  • Easy cleaning for simple maintenance.


HOW TO USE

01 In case for raw seeds pressing.

- Preheating
In summer, set up the temperature by 70 degrees for No. 1, 2, 3 In winter, 80 degrees and leave 30 min before use a machine. After done preheating, please check the oil cake with put the little amount first and then use it.

- Control handle
At the first step is maximum tight up and then fix after release the 2.5 turn. Oil cake thickness best position is 0.5mm for pressing the oil.

- Oil cake thickness
Each seeds has a different oil cake thickness. Thin oil cake is good for oil rate. When use a very low temperature then oil cake comes out paste state on the oil way. Also too much tight up the control handle then oil cake comes out on the oil way. At that time, stop the main motor and release the control handle a little bit then problem will be solve.

- After use it.
When done for every pressing, turn off the heater and please turn off the main motor switch after operate 3 min later.
02 In case for roasted seeds pressing

- Preheating
At the first step is maximum tight up and then fix after release the 2.5 turn. Oil cake thickness best position is 0.5mm for pressing the oil.
03 Grain control plate

Pull : normal sesame
Push : raw sesame
Center : cut off
04 Temperature of Refinery plate

Normal season 50 degree is good but winder could be increase a little bit.
05 How to clean up Refinery plate

Please use a soft flat scraper after turn off the comp switch with back position air lever for release the vacuum state.
06 Refill up comp oil

Check the comp oil gauge every 1 year and refill up if not enough the oil.
07 Oil Filter tank

Every 3~4 month, take off the oil from the oil filter tank.

TECHNICAL DATA

Size Weight Power
Consumption
Rated voltage Volume of pressd
oil in one hour
Oil extraction rate
112.5㎝ * 78㎝ * 128.2㎝
(Width*Length*Height)
220kg 5.3Kw 220v - 380v 40Kg(hr) 51%

Cautions
- Be careful that no ironware comes into the hopper.
- Do not intrude the material from which the oil is to be pressed like sesame, using the metal like an iron chopstick.
- Wash and filter the material from which the oil is to be pressed before use, so that the screw lasts long.
- If the remnants are stuck in the guiding grooves through which the oil comes out, scratch them out with an awl.